Saddle surface grinder SLZQ-818H/AH/AHR/AS

Product Description

Advantages
1, the use of independent hydraulic pressure station and the hydraulic cylinder, achieve the X axle moving smoothly, independent hydraulic station so that the temperature of oil temperature rise to host the variant to a minimum.
2, the guide rail are with wear-resistant film, and by the artificial precision shovel, its low wear can make the guide rail precision is long, the processing precision can be guaranteed
3, Y axis using ball screw, circular oil lubrication, so that the screw in the movement of the smooth, and the silk pole to achieve the lowest wear
4, lubrication system: automatic lubrication system to the guide rails and guide screw, to ensure that all the guide rails and key parts, can be fully lubricated
(H models are left and right, before and after the upper and lower hand; AH model is about before and after the automatic, up and down manually; AHR model is about before and after the automatic, up and down fast lift
AHD/AS models are left and right before and after automatic, up and down automatic feeding
Machine tool structure
1, the slider moves back and forth (Y axis), working around Taiwan mobile (X axis), spindle grinding head moves up and down (Z axis) structure
2, a bed body, a sliding seat, an upright post, a workbench and head seat are used high grade cast iron casting, using three-dimensional computer aided optimum design
3, the X axis by independent hydraulic pressure station and the hydraulic cylinder, promoting the work on the machine moves back and forth, realize the X axle moving smoothly, independent hydraulic station so that the temperature of oil temperature rise to host the variant to a minimum.
4, Y axis adopts stepper motor through a belt is connected with the lead screw drive slide in bed before and after the move, realize smooth movement of Y axis feed movement and CVT
5, Z axis is inserted steel guide rail, the head seat and then by the artificial precision scraping

Specifications Unit SLZQ-818H/AH/AHR/AS
Capacity Table size mm 460*200
Maximum displacement of left and right mm 540
Maximum displacement before and after mm 240
Distance Spindle Center-Table  mm 475
Max.load capacity kg 150
Work table T-slot mm*N 14*1
Table speed m/min 5-23
Before and after movement Front and rear wheels One frame mm 0.02
A circle mm 4
Automatic single maximum feed mm /
Fast moving speed One frame mm 820
A circle mm 980
Top and bottom structure Maximum displacement mm 375
Upper and lower feed handwheel One frame mm 0.01
A circle mm 2
Automatic feed rate mm 0.002-0.04
Fast moving speed m/min /
Sand wheel Sand wheel size mm 200*(6-20)*31.75
Spindle speed 50HZ R.p.m 2850
60HZ R.p.m 3420
Motor Spindle motor H*P 2*2
Up and down drive motor H*P /
Hydraulic motor H*P 1*4
Flush motor H*P 1/8*2
Front and rear drive motor H*P /
Weight Net weight kg 1300
Gross weight kg 1500
Size Height mm 1775
Outline dimension mm 1800*1400
Model
$8,268.00

Related Products