Dynamic cylindrical surface grinder SLZQ-620AHD/AS

Product Description

Schematic diagram of the front end of the spindle

The size of the nose end of the main shaft is shortened, and the bearing position of the bearing is optimized, so that the spindle is more robust, and the grinding rigidity is stronger and more durable.
X axis "a V flat" guide rail, the work table guide rail, plastic, manual precision scraping, double cylinder drive
Independent hydraulic oil tank to prevent oil temperature cause the deformation of castings, collision cylinder reduce cylinder cushioning impact strength, ensuring the grinding precision.
The Y axis trimming wheel stepless speed regulation, and which is stable, improve the grinding fineness
Z axis using PLC control system: up and down with automatic feeding function, can also be fast under the fast and manual feed, can be a multi machine operation
AHD model curing type panel operation


   AS model man-machine interface panel operation

Full circulation lubrication recovery system: to improve the precision of the guide rail and the transmission components are durable, 5-6 months to replace a lubricating oil, save the cost of oil
AS models to increase anti splash panels: to prevent the grinding process of garbage and water mist into the machine tool

Specifications Unit SLZQ-620AHD/AS
Capacity Table size mm 2000*600
Maximum displacement of left and right mm 2100
Maximum displacement before and after mm 640
Distance Spindle Center-Table  mm 700
Max.load capacity kgs 1700
Work table T-slot mm*N 16*3
Table speed m/min 7-28
After the feed hand wheel One frame mm 0.02
A circle mm 5
Automatic feed mm 0.5-12
Fast moving 50HZ mm 1250
60HZ mm 1500
Sand wheel Maximum displacement mm 530
Sand wheel size mm 400*40*127
Spindle speed 50HZ R.p.m 1450
60HZ R.p.m 1750
Upper and lower feed handwheel One frame mm 0.005
A circle mm 0.5
Feed rate mm 0.005-0.04
Up and down fast moving speed m/min 230
Motor Spindle motor HXP 10*4
Drive motor HXP 12N.M
Servo motor HXP servo1kw
Hydraulic motor HXP 7.5*6
Flush motor HXP 1/8*2
Front and rear drive motor HXP stepper12N.M
Size Height mm 2400
Area covered mm 6400*2500
Net weight kgs 7500
Gross weight kgs 8700

Related Products