• Machining Centers - V Series

    Vertical machining centers in a variety of sizes

  • Vertical Machining Centers that meet your needs

    improved accuracy for a wide variety of jobs from continuous production to prototypes.

    Built for extremely intricate processing

    The SYIL V series is designed and built for a production environment. These machines can literally overlap one another to better utilize valuable floor space and to promote cell manufacturing. The unique design provides service and operator interface to only the front or back of the machines.

    OEM and ODM for you

    SYIL vertical machining centers are creating the parts and die/molds that matter with precision, accuracy, repeatability and surface finishes that virtually eliminate bench work.

  • Benefits

    SYIL V CNC Machine Center is high accuracy with a high rigidity spindle to provide powerful cutting capabilities. has a superior structural design and high reliability. this series Vertical CNC Machine Center With the largest machining range in its class, also affordable cost.

     

    A unique feature of this machine is the spindle torque and horsepower compared to other small footprint machines. is able to provide a solution for the aerospace, medical, defense, 3C, automotive and other industries requiring high-value, complex parts from difficult to machine materials.

    small cnc machining center

    Perfectly designed machine structure throughout

    • Meehanite cast iron is tempered for stress relief to ensure structural stability without deformation
    • The base is mounted with high precision linear ways with high feed rate, allowing the machine to perform high-speed cutting.
    • Reinforced column base greatly increases structural strength.
    compact cnc machining center

    Specially designed column stable and rigid

    • The column on the SYIL Machining center is carefully analyzed and designed for increased rigidity.
    • The column base if reinforced to increase structural strength and rigidity.with this special design, the machine will exhibit ultra-high stability during high-speed operations.
    affordable cnc machining center

    Linear ways on base

    • Y-axis employs high precision, high-speed linear guideways, featuring smooth motion, low vibration, low noise and high accuracy.
    • The box type constructed base is mounted with 4 linear ways, making the machine capable of resisting heavy loads, additional benefits are its increased feed rate and higher positioning accuracy.
    cnc machine center

    24-Tool arm type magazine

    • Bi-directional,random tool selection.
    • Tool change can be  quickly accomplished in only 2.5 seconds(tool to tool)
    4 axis cnc machine center

    4/5 Axis rotary table

    • The rigidly constructed 4/5th axis rotary table is excellent in indexing accuracy and repeatability.
    • Minimum indexing unit is 0.001 degree.
    • direct-drive rotary kits also available.
    compact cnc machine center

    Belt and direct-drive spindle

    • Belt-drive spindle speed at 8000rpm(BT40/50).
    • Direct-drive spindle speed at 12000rpm(BT40/50).
    • The spindle is dynamically balanced for extremely smooth running.
    • CTS system also available.
    affordable cnc machine center

    Laser inspection and ball bar test

    • A sophisticated laser unit is employed to inspect the three-axis accuracy.
    • Including linear positioning, positioning, accuracy, pitch error, and backlash, etc.
    • A ball bar tester is employed for inspecting servo accuracy, static and dynamic geometric errors.
    vertical machining center

    Quality assurance

    • We ensure that the quality of each machine will meet our customers`requirements.
    • The V series are manufactured by a team of highly skilled technicians.rigorous inspections and test are conducted, enabling V series to achieve the highest standards.
    • The electrical circuit complies with the European Union CE (SGS) safety certification.
  • Technical Specifications

    Our Maching Centers have excellent technical specifications. All product variants come with a set of standard accessories. Optional accessories are available from stock.

    Technical Parameters

    v650 | v750

    Table

    • Working Surface:800x500mm
    • T-Slots(Number x Size x Distance):18x5x90mm
    • Max. Table Load:400kg(v650)
    • 500kg(v750)

    Travel

    • Longitudinal Travel X:650mm/700mm(v750)
    • Cross Travel Y:500mm
    • Headstock Travel Z:500mm
    • Distance Between Spindle End and Table Top:120-620mm(v650)
    • 150-650mm(v750)
    • Distance Between Spindle Center and Column Surface:550mm

    Spindle

    • Spindle Nose:BT40
    • Spindle Speed:8000rpm/10000rpm/12000rpm(Optional)
    • Mechanism of Transmission:Belt Type/Direct type(Optional)

    Feed

    • Cutting Feed:10000mm/min
    • Rapid Traverse:480000mm/min

     

    Auto Tool Changer

    • Tool Holder:Arm type
    • Tool Storage Capacity:24set
    • Max.Tool Diameter:85mm
    • Max.Tool Length:350mm
    • Max.Tool Weight:7kg
    • Tool to Tool:2sec

    Motors

    • Spindle Motor Output:7.5/11kw
    • Drive Motors X,Y Axis:1.8kw
    • Z Axis:3.0kw

    Machine Space & Weight

    Floor Space(Length x Width x Height):

    • 2100x2600x2650mm(v650)
    • 2700x2400x2650mm(v750)

    Net Weight:

    • 4900kg(v650)
    • 5100kg(v750)

    Technical Parameters

    v850 | v855

    Table

    • Working Surface:1000x500mm(v850)
    • 1000x500mm(v855)
    • T-Slots(Number x Size x Distance:18x5x90mm
    • Max. Table Load:500kg

    Travel

    • Longitudinal Travel X:800mm
    • Cross Travel Y:500mm(v850)550mm(v855)
    • Headstock Travel Z:500mm(v850)550mm(v855)
    • Distance Between Spindle End and Table Top:120-620mm(v850)
    • 150-670mm(v855)
    • Distance Between Spindle Center and Column Surface:
    • 570mm(v850)
    • 595mm(v855)

    Spindle

    • Spindle Nose:BT40
    • Spindle Speed:8000rpm/10000rpm/12000rpm(Optional)
    • Mechanism of Transmission:Belt Type/Direct type(Optional)

     

    Feed

    • Cutting Feed:10000mm/min
    • Rapid Traverse:480000mm/min

     

    Auto Tool Changer

    • Tool Holder: Arm type
    • Tool Storage Capacity:24set
    • Max.Tool Diameter:85mm
    • Max.Tool Length:350mm
    • Max.Tool Weight:7kg
    • Tool to Tool:2sec

    Motors

    • Spindle Motor Output:7.5/11kw
    • Drive Motors X, Y Axis:2.0kw
    • Z-Axis:3.0kw
    •  

    Machine Space & Weight

    Floor Space(Length x Width x Height):

    • 2700x2400x2650mm(v850)
    • 2700x2400x2650mm(v855)

    Net Weight:

    • 5300kg(v850)
    • 6000kg(v855)

    Technical Parameters

    v1060 | v1160

    Table

    • Working Surface:1200x600mm
    • T-Slots(Number x Size x Distance:18x5x100mm
    • Max. Table Load:800kg

    Travel

    • Longitudinal Travel X:1000mm(v1060)1100mm(v1160)
    • Cross Travel Y:600mm
    • Headstock Travel Z:600mm
    • Distance Between Spindle End and Table Top:120-720mm
    • Distance Between Spindle Center and Column Surface:650mm

    Spindle

    • Spindle Nose:BT40
    • Spindle Speed:8000rpm/10000rpm/12000rpm(Optional)
    • Mechanism of Transmission:Belt Type/Direct type(Optional)

    Feed

    • Cutting Feed:10000mm/min
    • Rapid Traverse:360000mm/min

    Auto Tool Changer

    • Tool Holder:Arm type
    • Tool Storage Capacity:24set
    • Max.Tool Diameter:85mm
    • Max.Tool Length:350mm
    • Max.Tool Weight:7kg
    • Tool to Tool:2sec

    Motors

    • Spindle Motor Output:7.5/11kw
    • Drive Motors X,Y Axis:3.0kw
    • Z Axis:3.0kw

    Machine Space & Weight

    Floor Space(Length x Width x Height):

    • 3000x2400x2650mm(v1060)
    • 3000x2400x2650mm(v1160)

    Net Weight:

    • 6500kg(v1060)
    • 7000kg(v1160)

    Technical Parameters

    v1370 | v1380

    Table

    • Working Surface:1400x700mm(v1370)
    • 1400x700mm(v1380)
    • T-Slots(Number x Size x Distance:18x5x110mm(v1370)
    • 18x7x110mm(v1380)
    • Max. Table Load:1300kg

    Travel

    • Longitudinal Travel X:1300mm
    • Cross Travel Y:700mm(v1370)800mm(v1380)
    • Headstock Travel Z:700mm
    • Distance Between Spindle End and Table Top:150-750mm(v1370)
    • 220-920mm(v1380)
    • Distance Between Spindle Center and Column Surface:
    • 750mm(v1370)
    • 855mm(v1380)

    Spindle

    • Spindle Nose:BT40/BT50(Optional)
    • Spindle Speed:8000rpm/10000rpm/12000rpm(Optional)
    • Mechanism of Transmission:Belt Type/Direct type(Optional)

    Feed

    • Cutting Feed:10000mm/min
    • Rapid Traverse:240000mm/min(v1370)
    • 200000mm/min(v1380)

    Auto Tool Changer

    • Tool Holder: Arm type
    • Tool Storage Capacity:24set
    • Max.Tool Diameter:85mm
    • Max.Tool Length:350mm
    • Max.Tool Weight:7kg
    • Tool to Tool:2sec

    Motors

    • Spindle Motor Output:11/15kw
    • Drive Motors X, Y Axis:3.0kw
    • Z-Axis:3.0kw

     

    Machine Space & Weight

    Foor Space(Lelngth x Width x Height):

    • 3600x2700x2850mm(v1370)
    • 3800x2750x2900mm(v1380)

    Net Weight:

    • 11800kg(v1370)
    • 14300kg(v1380)

    Technical Parameters

    v1580

    Table

    • Working Surface:1600x850mm
    • T-Slots(Number x Size x Distance:22x7x110mm
    • Max. Table Load:1500kg

    Travel

    • Longitudinal Travel X:1500mm
    • Cross Travel Y:800mm
    • Headstock Travel Z:700mm
    • Distance Between Spindle End and Table Top:190-890mm(BT40)
    • 160-860mm(BT50)
    • Distance Between Spindle Center and Column Surface:855mm

    Spindle

    • Spindle Nose:BT40/BT50(Optional)
    • Spindle Speed:8000rpm/10000rpm/12000rpm(Optional)
    • Mechanism of Transmission:Belt Type/Direct type(Optional)

    Feed

    • Cutting Feed:10000mm/min
    • Rapid Traverse:200000mm/min

    Auto Tool Changer

    • Tool Holder:Arm type
    • Tool Storage Capacity:24set
    • Max.Tool Diameter:75mm(BT40)85mm(BT50)
    • Max.Tool Length:350mm
    • Max.Tool Weight:7kg(BT40)15kg(BT50)
    • Tool to Tool:2sec

    Motors

    • Spindle Motor Output:11/15kw
    • Drive Motors X,Y Axis:3.0kw
    • Z Axis:3.0kw

    Machine Space & Weight

    Floor Space(Length x Width x Height):

    • 4000x2750x2900mm(v1380)

    Net Weight:

    • 14800kg

    Standard | Optional Accessories

    Standard

    • Siemens SINUMERIK 828(260) CNC Controller
    • High precision linear way
    • Central automatic lubrication system
    • Tools and toolbox
    • Work lamp
    • Tri-colored lamp guard
    • Spindle oil cooler
    • Airgun
    • Cooling liquid tank
    • Chip auger
    • Chip collector
    • X/Y/Z slide way extension protecting cover
    • Horizontal adjustment block and screw
    • Wire-control hand wheel
    • USB/RS232 interface
    • Rigid tapping
    • Spindle ring coolant nut
    • Mechanical and electrical instructions
    • SGS/CE certification

    Optional

    • Other CNC controller
    • 12000Rpm Direct-drive spindle
    • Chain type chip conveyor
    • Air conditioner for electrical box
    • Automatic probe system
    • Calibrator system
    • NC rotary table
    • Full closed loop high precision linear guide (Made in Switzerland)
    • CTS system(20 Bar)
    • Transformer
    • Oil skimmer
  • Modular Design

    Perfectly matched high-tech modules,meeting the highest demands and customized production application

    1

    Machining Center

    Default standard

    • Siemens SINUMERIK 828(260) CNC controller
    • 8000Rpm BT40 Spindle
    • High quality meehanite cast iron frame
    • high precision linear guide
    2

    Linear guide

    Upgrade

    • Full closed loop high precision linear guide (Made in Switzerland)
    3

    CNC controller

    Upgrade

    • Other CNC controller
    4

    Spindle

    Upgrade

    • 12000Rpm Direct-drive spindle
    5

    Accessories

    Upgrade

    • NC rotary table
    • Chip conveyor 
  • Application Examples

    CNC Machining Center and CNC Vertical Machining Center Testimonial and application

    vertical machine center

    Gelvke

    Job Specification:

    Project: Car Door Hinge
    Processes Involved: CNC machining
    Material: Iron

     

    Project Details:

    Gelvke Machinery Manufacture Limited,one of machinery manufacture products automobile parts for VW,Mercedes.etc.

  • Related Videos

    CNC Machine Center and Vertical Machine Center Video

  • Catalog Download

    CNC Machine Center and Vertical Machine Center Catalog download

    small vertical machining center

    SYIL V CATALOG

    • These machines can literally overlap one another to better utilize valuable floor space and to promote cell manufacturing
    4 axis vertical machining center

    4 axis direct-driver rotary kits

    • Direct connection to the load,Gearless,Backlashless,Low Noise.
    • High over-load capacity(4x), High speed,High servo-response.
    • Absolute encoders,High resolutions(20-bit at least),High Precision
    • Hollow-Shaft structure,easy wiring and piping.
    5 axis vertical machining center

    5 axis direct-driver rotary table

    • Direct connection to the load,Gearless,Backlashless,Low Noise.
    • High over-load capacity(4x), High speed,High servo-response.
    • Absolute encoders,High resolutions(22-bit at least),High Precision
    • Customer-Supply-Encoder available.
    All Posts
    ×